Fast Delivery Australia Wide

Australia’s online deck experts. Quality products, delivered to your door.


Wood Rejuvenator / Deck Brightener And Maintenance Cleaner

Wood Rejuvenator / Deck Brightener And Maintenance Cleaner

$95.00$210.00 Incl Tax

  • Prepare timber before coating
  • Neutralise stains and chemical agents after stripper and deep cleaner
  • Restore and brighten wood to the natural colour
  • Ideal for a maintenance cleaning
  • Environmentally and garden friendly
  • React in 15-20 minutes
  • Easy application spray and brush / scrubbing brush / roller
  • Cover of 7-8m2 per 1litre
SKU: VDF0000000099Wood Category:

Coming Soon…


Deck And Fence Wood Rejuvenator (STEP 2 OF DECK AND FENCE RESTORATION SYSTEM ) or used for a deck maintenance cleaning

Fast-acting liquid and deep penetrating, easy to use for professionals and home users for wood rejuvenation and brightening, chemical and stain neutralisation or just a maintenance cleaning.

Deck And Fence Wood Rejuvenator remove chemical, mildew, rust, tannin and weathering stains, Not suitable for animal urine stains. Safe to use for interior and exterior applications and gentle on the environment.

Use on all interior and exterior timber surfaces only.
Use on all interior and exterior timber surfaces only.

Precautions And Limitations:

Use in a well-ventilated area, Avoid skin and eye contact. Wear protective gloves, glasses and respirator.

Typical Properties
Clean Up – Water
Application Method: Spray & Brush & Roller

Application Conditions:

  • Apply on wet surfaces
  • Apply minimum 1mm thick
  • Vertical surfaces may need repeat application
  • Coverage 6-8 m2 per Litre

Application And Use Instructions

1. After using Deck And Fence Wood Finish Stripper or Deck And Fence Wood Deep Cleaner, your timber surface should be clean and free of any finishes, oils and organic growth.

2. Pre-wet the entire surface slightly before application with garden hose water mist or spray if it is dry.

3. Wear your protective equipment like gloves, glasses and respirator.

4. Shake the bottle before use and pour the liquid in a garden spray pump ( Undiluted)

5. Start spraying the chemical along the edges first and then fill up the entire remaining area – work on up 30m2 at the time. During application, make sure to keep the applied surface wet with a garden hose water mist or spray - chemical stop working when is dry.

6. Leave on the chemical for around 15-20 minutes; some deeper stains may require a repeat application on those areas.

8. Use a high-pressure washer with a max of 2700 PSI and work in the direction of timber grain or just a maximum pressure from the garden hose and rinse off thoroughly the entire surface of the chemical.

Note: Failure to clean off thoroughly the chemical may result in temporary whitening effect undercoating during the first application and disappear within 1 hour - light sand of surface before the application will help reduce this temporary reaction.

9. After the treatment, some wood species will lift the loose timber grain and become fuzzy. Deck And Fence Restoration System are recommending to lightly sand the entire wood surface for a smooth finish and remove some of the un-removed finishes.
Recommended using 60-80 grid sandpaper.

Note: Some wood species will appear lighter after treatment but generally, restore with the application of the finished product.

10. Now, after the final cleaning and sanding, it is time to apply the finish/sealer for your wood surface. Before applying any material on the wood, make sure the surface is dry completely, and moisture is below 15%.


Additional information

Weight N/A

1L Treat Up 7m2, 5L Treat up 35m2, 15L Treat up 105m2


There are no reviews yet.

Be the first to review “Wood Rejuvenator / Deck Brightener And Maintenance Cleaner”

Your email address will not be published. Required fields are marked *